LED System Manual

Battery Status

You will only see an LED if the battery is under 10%.
LED is always on when charging.

Unplugged

Battery ≤10% (critical)

Battery >10% (no LED shown)

Charging

Charging, battery <80%

Charging, battery 80-100%

Fully charged (100%)

Recording Status

LED is solid white when recording, and blinking white when muted or out of storage.
LED is turned off if you have Always-On LED disabled in the settings.

Recording (LED enabled)

Recording (LED disabled)

Muted or out of storage

Warning: The blinking white LED always appears for muted/out of storage. If you intend to keep it muted and like LED to be off - turn off the device.

Connection Status

Press the device button to check connection status with your phone.

Connected to phone (single blink)

Not connected (triple blink)

System Status

Not paired (ready to pair)

Unknown issue with the device

Warning: You cannot pair with the same device twice without unpairing from settings. In case of resetting the device you also need to forget it from the Bluetooth settings to pair again.

Warning: If you see magenta color, please contact our support immediately!